M810/M800EX series

Highlights:

  1. Modulerized design of edge blending processor
  2. Up to 120×68 warp control point
  3. Embedded video wall function, no image splitter is required.
  4. 4K loop out port for daisy chain connection in cascade application.
  5. Easy configuration via IR remote, PC tool, or WebGUI.

Geobox – M810/M800EX series

M810 is upgrade model from M800 series. The major difference is to support 17*9 geometry alignment and 120*68 control points fine-tune. Complete new GCT PC tool is adopted. It provides more friendly interface. User can swap between GCT and IR control operations at any time. It supports up to 7680*2160/30Hz input resolution. The output supports up to WUXGA resolution.

M810 provides multiple processing modules to control from 1 to 4 projectors in one box. Multiple units can be cascaded to build big scale immersive system. It was designed for sophisticated warp and edge blending without PC or additional device.

Multi-video display is to give edge blending system with more display flexibility. For a 3x projector edge blending system, user can configure as 1+1+1 independent display, 1+2 (two projectors blended) and all-in-one (three projectors blended). It is the best solution and flexibility for classroom application.

M811 - M812 - M813 -M814

Each box has 1-4 processing modules.

  • M811: Single module processor
  • M812: Dual module processor
  • M813: Triple module processor
  • M814: Quad module processor

 

Each processing module includes:

  • Input: 2x HDMI2.0b, 1x DP1.2a and 1x VGA
  • Output: 1x HDMI1.4
  • Loop output: 1x HDMI2.0b for daisy chain connection.

4 input ports (2x HDMI, 1x DP, 1x VGA) and 1x HDMI outputs are designed in each processing module. Digital input supports up to 7680*2160 @30Hz, 7680*1200 @60Hz/4096*2160 @60Hz with 4:4:4 full color sampling. Output supports up to WUXGA/2048*1080 @60Hz. It is integrated with 10-bit high end processor and supports non-VESA standard input timings.

Advanced warp technology is embedded in M810. User can use IR controller, USB, WebPage and Ethernet to perform edge blending and sophisticated geometry alignment up to 120x68 control points. Linearity Grid Line Adjustment for compete line movement and "W" shape Corner Wall image adjustment are new functions in geometry alignment. Separate R, G, B gamma correction for edge blending region color fine-tune, individual color correction for each output and 9 regions black level uplift to compensate light leakage in the projector are also standard functions in M810. Users can see real time geometry and color adjustment to get optimized result.

HDMI loop out supports daisy chain connection up to 8k/2k @30Hz / 8k/1k @60Hz without additional HDMI splitter. Video wall function is to crop and allocate source image for each projector and set overlap pixels for edge blending. Complete curved edge blending can be achieved without additional devices.

PIP (picture in picture) and POP (side by side) are standard functions.  It provides flexible displays in edge blending system. For a 3x projector edge blending system, user can configure as 1+1+1 independent display, 1+2 (two projectors blended) and all-in-one (three projectors blended). It is the best solution and flexibility for classroom application.

M810 is an ideal solution for simulation and immersive application. It can execute edge blending from multiple PCs to increase system resolution. Unnecessary image can be masked out.

M810 is designed for 7/24 working condition. Using M810, users can replace high end projector with low-cost projector without lens shift, warp and edge blending function. It provides easy configuration, low entry barrier, cost effective, reliable and flexible solution.

M801EX - M802EX - M803EX - M804EX

Each box has 1-4 processing modules.

  • M801Ex: Single module processor
  • M802Ex: Dual module processor
  • M803Ex: Triple module processor
  • M804Ex: Quad module processor

 

Each processing module includes:

  • Input: 2x HDMI 2.0b, 1x DP1.2a and 1x VGA
  • Output: 1x HDMI 1.4
  • Loop output: 1x HDMI 2.0b for cascade.

Projection mapping function is embedded in M800Ex models. User can input up to 10 patterns (images) to M800Ex, then implement projection mapping. The pattern needs to be monochrome with BMP file format. User can use any signal source and select up to 4 display styles in each pattern with programmable background color. One 256 color pattern can be overlapped across entire image. Any signal source and content can be used and no need to do pre-mask in the content.

Projection mapping through Multiple channel combination, user can achieve more fancy projection mapping effect. User can also control the display time for each mapping pattern through RS232 command.

In additional to projection mapping functions, all other features and functions are the same as M800 edge blending processor. user can implement edge blending function together with projection mapping function to achieve big scale projection mapping project.

Contact

Adres:Portsmuiden 108 A
1046 AM Amsterdam Telefoon:+31 20 6133855 Sales:sales@vhs-bv.nl Support:support@vhs-bv.nl